Aluminium Foil Tape Technical Specification
Reference:
FT/30/AS291N - High performance 30 micron Aluminium Foil
Description:
A soft Aluminium Foil tape coated with a long lasting, ultra violet resistant acrylic adhesive on one side and lined with a release paper to protect the adhesive face. This tape meets "class 1" and "class O" fire regulations.
Specification:
| Item | Value |
|---|---|
| Widths available | 50mm – 75mm – 100mm |
| Standard length | 45.7 m / 50 yards imp |
| Total thickness inc release paper | 0.12 mm |
| Tack to steel | 12.0 N / 25 mm |
| Tensile strength with release liner | 180 N / 25 mm |
| Tensile strength without release liner | 40 N / 25 mm |
| Adhesion to steel: After 1 hour | 18 N / 25 mm |
| Adhesion to steel: After 24 hour | 26 N / 25 mm |
| Adhesion to self: After 1 hour | 13 N / 25 mm |
| Application Temperature | +5°C to +60°C (can be applied at temps down to 0°C provided surface is free from ice or moisture) |
| Service temperature | -20°C to +90°C |
| Moisture vapour permeability | Less than 1gm/m²/24hrs@38°C and 90% RH |
Uses:
A highly specified Aluminium Foil Tape for use in any situation where long life, high adhesive strength or ultra violet resistance is required. Surfaces to be bound must be clean, dry and free from dust. If necessary clean surfaces sparingly with a keytone free solvent, allow to dry prior to tape application.
Disclaimer:
Important: Please read our standard disclaimer.